Print Page | Close Window

7045 And The Range Lever

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=204082
Printed Date: 22 Nov 2024 at 2:14am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 7045 And The Range Lever
Posted By: Unit3
Subject: 7045 And The Range Lever
Date Posted: 09 Nov 2024 at 9:49am
She has high and low, but she won’t go into park. Any ideas where to start looking?

-------------
2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C



Replies:
Posted By: plummerscarin
Date Posted: 09 Nov 2024 at 9:54am
The short park cable needs adjusted or replaced. It is adjustable at both ends. One inside the console. The other under the floor. Mine also had a loose bracket attaching the cable to the transmission.


Posted By: Leon B MO
Date Posted: 09 Nov 2024 at 1:13pm
If it's the same as in 8050 it's possible that the end of the cable came out of the keeper on top of the transmission, that happened to me. I pulled the inspection cover inside the cab above the transmission and found that the wire clip had rusted and the cable was not in the keeper for the park lever, not an expensive fix but more of a pain in the butt fix.
Leon B Mo

-------------
Uncle always said "Fill the back of the shovel and the front will take care of itself".



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net