Print Page | Close Window

ACC 60 DS lift cylinder rebuild info needed

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=204063
Printed Date: 12 Nov 2024 at 6:30pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: ACC 60 DS lift cylinder rebuild info needed
Posted By: joetx
Subject: ACC 60 DS lift cylinder rebuild info needed
Date Posted: 08 Nov 2024 at 11:24am
I have an ACC 60 DS. My mast cylinders seals are leaking.   Can someone give some help in repairing these seals. Or is there a manual somewhere? Don't know how to approach this as I don't know know how to remove the cylinders to repair them. Thanks, Joe.



Replies:
Posted By: Eric B
Date Posted: 08 Nov 2024 at 12:32pm
To remove that cylinder is definitely labor intensive. You really should be two persons and some form of a lift to do this repair job. if you haven't previously worked with resealing cylinders your best choice is to find a trustworthy and reasonable mechanic or hydraulic shop to refurbish the cylinder with new seals. The seals will be common types and sizes so they don't have to be Allis-Chalmers parts. 
I'm including a link for a A-C forklift manual for sale, although with the right kind of help you may not need it for this repair job you're doing.

https://www.kijiji.ca/v-non-fiction/parksville-qualicum-beach/allis-chalmers-forklift-parts-catalog-manual-lift-truck/1704569912" rel="nofollow - https://www.kijiji.ca/v-non-fiction/parksville-qualicum-beach/allis-chalmers-forklift-parts-catalog-manual-lift-truck/1704569912


-------------
Currently- WD,WC,3WF's,2 D14's B. Previously- I 600,TL745,200,FL9,FR12,H3,816 LBH. Earth has no sorrow that Heaven cannot heal!


Posted By: orangeman
Date Posted: 09 Nov 2024 at 12:11pm
JoeTX - After I finishing fall chores on the land - will take a look at my service section on the F-series Forklifts and see what that says.  We may need to go through email ` welcome to send me a private message on here ~ Orangeman



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net