Farm Equipment - 170 Carb Question

Print Page | Close Window

170 Carb Question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=203990
Printed Date: 05 Nov 2024 at 12:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 170 Carb Question

Posted By: OPS201
Subject: 170 Carb Question
Date Posted: 04 Nov 2024 at 3:20pm

My needle and seat are leaking on my Zenith/Bendix carb on my 170. I have ordered two different rebuild kits and the seat does not screw into my carb. I ordered the parts kit for the 267 Zenith. Any ideas? Thanks

Replies:

Posted By: DrAllis
Date Posted: 04 Nov 2024 at 3:39pm

Either the parts are wrong, or you don't have the original OEM Zenith carb. I'm sure a D-17 Zenith carb needle and seat will fit--same threads. But the inlet hole may be a little smaller. AGCO 70251783 for the 170 and 70223909 for the old D-17.

Posted By: OPS201
Date Posted: 04 Nov 2024 at 8:14pm

Thank you for the information.