8050 Hydraulic Couplers
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=203972
Printed Date: 22 Nov 2024 at 7:09am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 8050 Hydraulic Couplers
Posted By: coltonconverse
Subject: 8050 Hydraulic Couplers
Date Posted: 03 Nov 2024 at 12:28pm
| I just recently bought an 8050, and when trying to hook up our 13 shank IH 5500 chisel, I realized the Pioneer fittings on the chisel do not fit the 8050 couplers. What type of couplers does the 8050 have? Is there an adapter I could use? |
Replies:
Posted By: SteveM C/IL
Date Posted: 03 Nov 2024 at 12:54pm
| HMMMMM ! I have 2 8070's and they both have pioneer female fittings. The 83 has the first design release while the 85 has the lock lever allowing pressurized hook/unhook. What number on you chisel fitting?....and are you sure they don't fit? Sometimes the 83 is is a t**d to connect. |
Posted By: bigal121892
Date Posted: 03 Nov 2024 at 4:16pm
|
The 8050 should have ISO couplers. Standard Pioneer couplers should mate up, but might be a bit loose. |
Posted By: AC7060IL
Date Posted: 03 Nov 2024 at 4:50pm
Are you saying there is a diameter difference between your IH chisel & 8050? Like 1/2” coupler on 8050 verses maybe either a 3/8” or a 3/4” on chisel?? |
coltonconverse wrote:Posted By: DrAllis
Date Posted: 03 Nov 2024 at 5:07pm
| Best way to connect hoses is with both remote levers in FLOAT and engine off. |