11x16’s on a 6080
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=203904
Printed Date: 22 Nov 2024 at 7:30am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 11x16’s on a 6080
Posted By: Allismass
Subject: 11x16’s on a 6080
Date Posted: 30 Oct 2024 at 1:55pm
|
Will they have enough clearance? The number of lugs is more… anyone done this? ------------- Ac 720,160,5050,5050,175,185,6080, 200 |
Replies:
Posted By: DSeries4
Date Posted: 30 Oct 2024 at 3:24pm
|
11 x 16 would be too much for a 6080 in my opinion. 11 x 16 look good
on my much larger D21. 10 x 16 is a perfect fit for my 6080.  ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: IBWD MIke
Date Posted: 31 Oct 2024 at 9:16am
|
I tend to agree. Mine has 10.00's on it also and look and preform good. If you had 18.4x38's on the back...... Never seen that one done, yet. 11.00's are quite a bit taller than 10.00's. |
Posted By: SilverShoes
Date Posted: 02 Nov 2024 at 12:34pm
| That is a beautiful sight! |