Allis 185 PTO shaft removal
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=203865
Printed Date: 22 Nov 2024 at 12:51pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis 185 PTO shaft removal
Posted By: Jared185
Subject: Allis 185 PTO shaft removal
Date Posted: 27 Oct 2024 at 6:28pm
|
Hello, I am trying to remove a bent PTO shaft out of a 185. My brother hit a stump with a bush hog and now the shaft is bent and will not disengage. I tried to pull the shaft today by removing the rear cover that holds the bearing and shaft in but couldn’t budge the shaft. The replacement shaft that I purchased looks like it would just slide in and out with the exception of what I can only guess is there may be a bearing at the front of the shaft that may be holding it. Is there a bearing on the front of the shaft that is pressed on? Do I need to get the PTO disengaged before I try to remove the shaft? Any information is appreciated thanks
|
Replies:
Posted By: DrAllis
Date Posted: 27 Oct 2024 at 6:56pm
|
It won't pull out because it is bent. Somehow get something welded to the junk shaft so you can hook a chain onto it and pull (or yank) it out. Drain all the oils first.
|
Posted By: KJCHRIS
Date Posted: 27 Oct 2024 at 7:16pm
He's talking to drain the transmission (plug is above the drawbar under rear of tractor) and the torque tube/ hydraulics ( 1/2" pipe plug in housing just ahead of left step).
-------------
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,
|
|