Farm Equipment - Baler moisture monitor on an AC D15

Print Page | Close Window

Baler moisture monitor on an AC D15

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=203781
Printed Date: 22 Nov 2024 at 1:27pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Baler moisture monitor on an AC D15

Posted By: RP Farms
Subject: Baler moisture monitor on an AC D15
Date Posted: 23 Oct 2024 at 7:44am

I am considering putting a moisture meter on the AC 442 balerthat we have. It will probably be the agratronix BHT-2 and I believe that it works off of electrical resistance between two sensors and a ground wire attached to the baler.

With the D15 II being a positive ground tracor and not a negative ground, is this going to cause a problem? I aks here before emaling or calling the manufacturer because I'm sure there is someone on here who has done this.

Replies:

Posted By: WF owner
Date Posted: 23 Oct 2024 at 8:18am

Your D-15 can easily be changed to 12 volt negative. You simply change the two small wires on the coil, reverse the battery cables and "flash" the generator before you start it.

If you have an ammeter, you will also need to reverse the wires on the meter.