Print Page | Close Window

Dupont paint question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=20369
Printed Date: 09 Feb 2025 at 6:34pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Dupont paint question
Posted By: WC7610
Subject: Dupont paint question
Date Posted: 04 Nov 2010 at 7:41pm

Anyone here have any experience with Variprime and Chomapremier primer?  Pros/cons/recommendations?

Thanks in advance,

-------------
Thanks



Most Bad Government has grown out of Too Much Government- Thomas Jefferson


Replies:
Posted By: Gary in da UP
Date Posted: 04 Nov 2010 at 8:00pm
Variprime is a good product, excellant over new bare or sandblasted metal. I have no experience with  the chroma line, can't offer advice there.

Posted By: Toscani SD
Date Posted: 04 Nov 2010 at 9:25pm
vari prime is good on sheet metal,but is not really recommended for sand blated parts,it doesn't seep down into the porus blasted areas,epoxy would be better there,i have used chroma premier paints,witch are very high end paints,but not the primers,u really don't need a fancy primer like that when the cheaper ones will give the same results


Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net