Farm Equipment - Cast centres interchangeable 7000 series

Print Page | Close Window

Cast centres interchangeable 7000 series

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=203529
Printed Date: 22 Nov 2024 at 9:21pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Cast centres interchangeable 7000 series

Posted By: JPG AUSTRALIA
Subject: Cast centres interchangeable 7000 series
Date Posted: 05 Oct 2024 at 11:24pm

Axle sizes differ from the 7040,7060,7080 ,but are the outside of the axle wedges the same across all models? So can a 7040 casting be swapped with say a 7080?
Reason why is my bare back swinging drawbar 7060 and 7080 have near on a foot thick cast centres and i have converted them over to 3pt and with the 50 ft 3pt cultivator weighing them down was thinking of getting the thin cast centers that the 3pt tractors have and doing a swap , thanks

Replies:

Posted By: DrAllis
Date Posted: 06 Oct 2024 at 6:13am

7010-20-30-40-45-50-60-80 7580-8550 8010-30-50-70 4W220-305 will all interchange if you use the correct axle wedges.

Posted By: JPG AUSTRALIA
Date Posted: 06 Oct 2024 at 6:05pm

Thanks for the reply doc👍