Farm Equipment - R62 concave filler bar removal

Print Page | Close Window

R62 concave filler bar removal

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=203498
Printed Date: 22 Nov 2024 at 9:13pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: R62 concave filler bar removal

Posted By: SteveM C/IL
Subject: R62 concave filler bar removal
Date Posted: 04 Oct 2024 at 10:38am

What is the procedure to remove concave filler bars on R62? I see the nut and clamp underneath. Do you unhook the adjuster links and lay it back to pull them out the top? The service manual is worthless. Do you fish them out the inspection door by gearbox?

Replies:

Posted By: Dirt Farmer
Date Posted: 04 Oct 2024 at 12:54pm

Steve, if you open both doors IN THE HOPPER on the upper back side where you can see the feeder house chain on 1 side and the other will give you light and a view point you should be able to get them out through there, fish them across with a long screwdriver or prybar. Hope this helps and I got to you before you pulled your hair out

Posted By: SteveM C/IL
Date Posted: 04 Oct 2024 at 4:25pm

Thx for the information. Maybe this weekend but needed to know how.