Pulling Forum - Puller 190xt with 426 engine

Print Page | Close Window

Puller 190xt with 426 engine

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=203453
Printed Date: 26 Nov 2024 at 3:57pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Puller 190xt with 426 engine

Posted By: goomer
Subject: Puller 190xt with 426 engine
Date Posted: 30 Sep 2024 at 5:09pm

190xt with 426 engine. Could sell a couple different ways. Has stock 426 with hardened rods, Kentucky 2 disc clutch, Atlas shift collar for two speed high/low. P-pump with ice intercooler. Cap brother hubs with firestone 23 degree 18.4-38. wheelie bars custom hitch roll bar weight brackets. solid front axle. weighs roughly 6900 lbs. always pulled road gear. Rear end is squeaking so I'm guessing I need to fix rear spider gears that maybe seized.

Replies:

Posted By: d17brown
Date Posted: 08 Oct 2024 at 8:44pm

do you have a number to call

-------------
phil

Posted By: Newallis
Date Posted: 16 Oct 2024 at 3:39pm

Out of curiosity, what all did you have to do to put a 426 in it?

Posted By: goomer
Date Posted: 16 Oct 2024 at 5:27pm

Make backing plate out of a 7580 type backing plate by centering/laying 301 plate over 426 plate. Grind some material off newer 426 block for a 301 starter. Starter is then mounted where a 301 is located. custom flywheel made to 301 size