Farm Equipment - Allis 400 loader

Print Page | Close Window

Allis 400 loader

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=20336
Printed Date: 09 Feb 2025 at 7:18pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis 400 loader

Posted By: TGerber
Subject: Allis 400 loader
Date Posted: 04 Nov 2010 at 11:40am

Hi Guys
I was wondering if an Allis 400 loader will fit on a 175 without a whole bunch of fabrication needed.
Thanks
Terry

Replies:

Posted By: Matt MN
Date Posted: 04 Nov 2010 at 11:45am

I am thinking it should fit with the D17 brackets. If the frame rails are the same width. I am sure there will be drilling involved.

-------------
Unless your are the lead horse the scenery never changes!!

Posted By: Gary
Date Posted: 04 Nov 2010 at 5:00pm

400 is the Series model of the loader.

445 on a WD-45, 414 on a D-14, 415 on a D-15, 417 on a D-17.

and then you have the 500 Series:

517 on a D-17 Series IV, 519 on a D-19, these do not have the pump mounted out front.

What Series and model do you have ?

Gary

Posted By: TGerber
Date Posted: 05 Nov 2010 at 7:18am

The sticker on the loader frame says 400, it is currently mounted on a 5045. I just assumed it was a model 400 loader.

Posted By: TGerber
Date Posted: 05 Nov 2010 at 7:21am

- oh and the pump is not mounted out front. - Hope this helps Thanks for the replys.

Posted By: Matt MN
Date Posted: 05 Nov 2010 at 7:24am

yes there was also a straight 400 model loader. with no hydraulic resivior in the frame.

-------------
Unless your are the lead horse the scenery never changes!!

Posted By: Nathan (SD)
Date Posted: 05 Nov 2010 at 7:29pm

Yes I believe the 400 was the one you tried to sell to fit on other color tractors. Lots of universal brackets with it. Should fit 175. I think the 400 even fit the 7000 series.