Farm Equipment - 7010 Powershift issue

Print Page | Close Window

7010 Powershift issue

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=203321
Printed Date: 22 Sep 2024 at 11:32am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7010 Powershift issue

Posted By: 190 driver
Subject: 7010 Powershift issue
Date Posted: 22 Sep 2024 at 7:09am

A problem cropped up with the 7010 powershift yesterday. It drove fine the day before. I parked it and got in it yesterday and the powershift wont do anything. I went to shift it and the shift lever will only go into reverse and up to second gear and will not move any further, but won't even try to pull itself. I unhooked the cable and tried to manually move the shift arm but that didn’t make a difference. I will pull the cab floor and check the linkage and inching valve operation today. I assume something happened in the detent. Am I on the right track? I've never had anything to do with a this transmission before so I'm just guessing here.

Replies:

Posted By: 8070nc
Date Posted: 22 Sep 2024 at 8:27am

If i had to guess Id say something happened in the control valve to the connector between the input shaft and the rack. We had a similar problem on a 7040 years ago

-------------
1984 80780
1957 D14
DES 300 with 25000 engine
616 tractor