Plow ID, need help
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=20317
Printed Date: 09 Feb 2025 at 5:46pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Plow ID, need help
Posted By: Osage_Orange
Subject: Plow ID, need help
Date Posted: 03 Nov 2010 at 10:34pm
While looking for a plow for my WD, I found this. What does it fit?
 ------------- Why is there never time to do it right the first time, but always time to go back and fix it? |
Replies:
Posted By: TramwayGuy
Date Posted: 03 Nov 2010 at 11:48pm
| Nothing, the way it is. At one time it was probably an early 'WD' pickup plow that mounted to the tractor drawbar. It is missing the round bar , the tongue, the lift clevises and the beaming screw assembly. Later models did not have curved beams and connected to the front drawbar pin |
Posted By: R Aiken
Date Posted: 04 Nov 2010 at 3:30am
| O O That plow is a Case. It is for a VAC made before the eagle hitch 3pt. It went on with an upside down 3pt hitch system. I have a tractor with a mounted plow on it like that. Richard |
Posted By: Osage_Orange
Date Posted: 04 Nov 2010 at 9:36am
|
It is being advertised on Craigslist as fitting an Allis.
I guess with enough cutting, welding, and parts, it will fit anything.
Thanks for the feedback fellas...........james
------------- Why is there never time to do it right the first time, but always time to go back and fix it? |