Print Page | Close Window

Gleaner M2 wiring diagram

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=203071
Printed Date: 14 Nov 2024 at 6:10am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Gleaner M2 wiring diagram
Posted By: WD45 Aaron
Subject: Gleaner M2 wiring diagram
Date Posted: 06 Sep 2024 at 5:50pm
This is a long shot but does anyone have a wiring diagram for an M2 Hydro? Specifically, I am looking for the wiring of the fuse blocks in the cab. Unfortunately, I am an hour away from the machine and the manual.

Thanks,
Aaron


-------------
Machinery rescue for all things rusty or broken. Current residents include 3-1/2 WD45s, Oliver Row 77 gas, 88 diesel, Farmall super C, parts C, two Cat D2's, Clark C500-80 forklift, and a sick Kubota.



Replies:
Posted By: AC7060IL
Date Posted: 07 Sep 2024 at 6:27am
https://parts.agcocorp.com/us/en/apbsearch?q=gleaner/79012320/l&name=M2+%2F+M3+SERIES+COMBINE+%2815401-25900%29" rel="nofollow - https://parts.agcocorp.com/us/en/apbsearch?q=gleaner/79012320/l&name=M2+%2F+M3+SERIES+COMBINE+%2815401-25900%29

Using your smartphone or laptop click on the above weblink. It will take you directly to Agcopartsbook.com for the Gleaner M2 & M3 series combine parts manual. Once there scroll down to “electrical & instruments” section. If you open the first listing (diagram)it will begin in the combine’s right hand console wiring(page fuse box area). It will display a diagram (photo)of that page. In the area immediately above diagram, you can use the left/right arrows to navigate page to page.

Above the arrows is a “table of content” button. It will take you back to entire M2 listings.

The “diagram” button is highlighted in red cause that’s your current location.

The “parts list” bottom will give a parts number listing for whichever diagram you’re viewing.

Remember, the site is a huge database, so be patient for searches & give time for a page to load and you’ll get along fine. Get in a hurry & not so good.
Hope this helps.


Posted By: WD45 Aaron
Date Posted: 07 Sep 2024 at 7:23am
Thanks for the info. I've referenced that parts book before but I don't see an actual wiring diagram showing wire colors, where they connect, etc. 

A few electrical "tragedies" have happened to the machine over the years. Some of the fuse blocks are melted and or broken. And there are broken connections. I have new fuse blocks to replace the damaged ones. I'd like to study the schematic ahead of time to get a game plan.  I believe the operating manual has schematics but I didn't think to bring it home with me last time I was working on the machine.

Thanks,
Aaron










-------------
Machinery rescue for all things rusty or broken. Current residents include 3-1/2 WD45s, Oliver Row 77 gas, 88 diesel, Farmall super C, parts C, two Cat D2's, Clark C500-80 forklift, and a sick Kubota.


Posted By: AC7060IL
Date Posted: 07 Sep 2024 at 9:26am
WD45 Aaron, Thanks for specifying your need.
The Gleaner M2 “Service Manual” has a schematics page for the electrical wiring per fuse box & cab console that denote wire colors per function(s), not the Owners/Operators manual.
I don’t have a M2 service manual or I would have taken a photo of said page & upload it for you. But maybe someone else on the forum does?



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net