Garden Tractors - Rt angle gearbox

Print Page | Close Window

Rt angle gearbox

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=202951
Printed Date: 30 Oct 2025 at 7:56pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Rt angle gearbox

Posted By: SteveM C/IL
Subject: Rt angle gearbox
Date Posted: 30 Aug 2024 at 6:52pm

Old 7016 Simplicity. What is procedure to get cross shaft out? Down to bare shafts sticking out and don't know how to get snapring out of gear.

Replies:

Posted By: steve(ill)
Date Posted: 30 Aug 2024 at 7:52pm

assembly starts at 14:50.

https://www.youtube.com/watch?v=ENnIITDO4y8" rel="nofollow - https://www.youtube.com/watch?v=ENnIITDO4y8

Steve... am i looking at the wrong thing ? I dont see a snap ring..

https://www.youtube.com/watch?v=ZLkO4f5CePc

-------------
Like them all, but love the "B"s.

Posted By: steve(ill)
Date Posted: 30 Aug 2024 at 8:00pm

https://www.youtube.com/watch?v=ZLkO4f5CePc%20" rel="nofollow - https://www.youtube.com/watch?v=ZLkO4f5CePc

-------------
Like them all, but love the "B"s.

Posted By: Codger
Date Posted: 31 Aug 2024 at 6:21am

Don't know if a hydrostat, or gear drive but here is a breakdown:

https://www.partstree.com/models/7016-1690341-simplicity-garden-tractor-16hp/bevel-gear-side-plate-group-7010-7016-0/" rel="nofollow - https://www.partstree.com/models/7016-1690341-simplicity-garden-tractor-16hp/bevel-gear-side-plate-group-7010-7016-0/

-------------
That's All Folks!

Posted By: Mikez
Date Posted: 31 Aug 2024 at 7:30am

What are you trying to do to bevel gear box

Posted By: SteveM C/IL
Date Posted: 31 Aug 2024 at 9:35am

That shaft he slipped in is larger dia where it shoulders gear. Mine has a wire ring. Looks like just drive shaft out of gear. I have a broken tooth gear box in running tractor and "good" gear box in parts tractor. The good box has a bad keyway on through shaft. The bad box has good through shaft. I thought I 'd just switch shafts but don't know the procedure

Posted By: SteveM C/IL
Date Posted: 31 Aug 2024 at 1:45pm

...shaft just drives out of gear.....

Posted By: Mikez
Date Posted: 31 Aug 2024 at 8:32pm

The ring is a pain in but you just work it out with a pick. Usually gets bent and should be replaced. And should not have to drive gear. The ring is what holds it. There was different shafts. Depends on whether it was a gear shift or hydro or variable speed.