Print Page | Close Window

Roto bale bale loader question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=20290
Printed Date: 08 Feb 2025 at 11:11pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Roto bale bale loader question
Posted By: Joe(OH)
Subject: Roto bale bale loader question
Date Posted: 03 Nov 2010 at 9:59am
I have an Allis made bale loader, but when I put it on my WD-45 I have to remove the fender in order for the bracket to fit.  Anyone else have one of these on a '45 and have this problem?  Anyone have an extra rear bracket they might be willing to part with, or at least some measurements so I can see if  mine is the same?  According to the book I should be able to leave the fender on, but mine wont clear.  I would like to restore both tractor and loader, but would like to leave the fender on if at all possible.
 Thanks for any help,
 Joe  

-------------
Life is simpler when you plow around the stump.



Replies:
Posted By: Matt MN
Date Posted: 03 Nov 2010 at 11:35am
I know that WD45's have different height fender brackets throughout the years, Maybe you have the later taller ones? and the loader was designed for the earlier shorter ones?   Just a guess.

Matt

-------------
Unless your are the lead horse the scenery never changes!!



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net