Farm Equipment - D-17 Power Adjust Wheels Acentric/Lug Bolt

Print Page | Close Window

D-17 Power Adjust Wheels Acentric/Lug Bolt

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=202798
Printed Date: 17 Sep 2024 at 3:22pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D-17 Power Adjust Wheels Acentric/Lug Bolt

Posted By: KY D-17
Subject: D-17 Power Adjust Wheels Acentric/Lug Bolt
Date Posted: 20 Aug 2024 at 1:18pm

Is there a special wrench/socket that fits the Power Adjust Wheel lug nut? If so, where can I get one used or new? A 3/4" socket is to tight (you can drive it on) and a 13/16" is to big. I would not had thought AC would have used a 32nd or 64th socket size. KY D-17

Replies:

Posted By: Allis dave
Date Posted: 20 Aug 2024 at 1:56pm

I bought a 25/32 socket and it fits almost perfectly.

I finally got a 3/4" drive impact socket and that seems to take much of the frustration out of adjusting the wheels. It's hard to get enough pull on a 1/2 breaker bar. Broke a breaker bar and craftsman socket on a lock that was recently freed up. The 3/4 drive is nice!

I mechanic frind of mine that worked at Allis for a while out of school said he had a lot of special 32nd wrenchs for the Allis. Not sure what for, but that's what he says.

Posted By: DrAllis
Date Posted: 20 Aug 2024 at 2:34pm

Wheel wrench and handle was in the tool box when the tractor was new.

Posted By: ACinSC
Date Posted: 20 Aug 2024 at 6:58pm

Pretty sure my D 15 takes a 25/32 socket.

Posted By: Clay
Date Posted: 20 Aug 2024 at 7:04pm

20mm impact socket

Posted By: KY D-17
Date Posted: 20 Aug 2024 at 7:07pm

Thank you all. I just ordered a 3/4" drive 25/32 socket. KY D-17. PS. The D-17 Series IV is different and I have the factory wrench.

Posted By: ACinSC
Date Posted: 21 Aug 2024 at 6:14am

Can you post a link for the socket? I'd like one too. Thanks

Posted By: KY D-17
Date Posted: 21 Aug 2024 at 8:00am

it came from Genius Tools USA <msgaccount@geniustoolsusa.com>

I ordered a 3/4" drive but 1/2" drive is also available. You can also Google: 3/4" drive 25/32 socket. If you can't find it let me know.

tel:%28909%29%20230-9588" rel="nofollow - (909) 230-9588

Hours of Operation:
8:30AM - 4:30PM.

Genius Tools USA
1440 East Cedar St
Ontario, California 91761,
United States

Posted By: ACinSC
Date Posted: 21 Aug 2024 at 9:17am

Thanks T J .