8' Model 40 SC Disc FS
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Classifieds
Forum Description: For sale or wanted items
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=202771
Printed Date: 29 Sep 2024 at 10:25pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 8' Model 40 SC Disc FS
Posted By: PaulB
Subject: 8' Model 40 SC Disc FS
Date Posted: 18 Aug 2024 at 6:19pm
I have this model 40 Snap Coupler Disc Harrow for sale. I have replaced all found worn/missing parts and loose bolts. Field ready ready WD or similar size. I have been using it behind a D10 with a LOT of added front weight and it's a bit light even with all the added weight. It has almost new 20" notched front blades on a wide spacing. The rears are smooth 16" blade on a narrow spacing. This model allows for the gangs angle to be adjusted and I have it set somewhat aggressive, it will tear into sod. All the Bal-Pak bearings are good. I'll sell it for $1200. Located in north central Maryland, not far from Gettysburg, Pa.  ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Replies:
Posted By: IBWD MIke
Date Posted: 19 Aug 2024 at 7:56am
|
That would be a great one to have but Maryland is a loooong way from Iowa. |
Posted By: PaulB
Date Posted: 05 Sep 2024 at 6:37am
|
There's probably someone with Allis Express that would move it for you. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |