Picked up a 3 point adaptor n ended up with this
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=202756
Printed Date: 27 Nov 2024 at 5:32am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Picked up a 3 point adaptor n ended up with this
Posted By: Fred in Pa
Subject: Picked up a 3 point adaptor n ended up with this
Date Posted: 17 Aug 2024 at 9:06pm
Going to make a GOOD parts tractor   
------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |
Replies:
Posted By: 8070nc
Date Posted: 17 Aug 2024 at 9:23pm
|
Parts tractir?????? ------------- 1984 80780 1957 D14 DES 300 with 25000 engine 616 tractor |
Posted By: 8070nc
Date Posted: 17 Aug 2024 at 9:23pm
|
Tractor ------------- 1984 80780 1957 D14 DES 300 with 25000 engine 616 tractor |
Posted By: plummerscarin
Date Posted: 17 Aug 2024 at 10:47pm
| Nice. I passed on a 3pt adapter at consignment auction today. It was missing the chains, top link bracket, and middle braces |
Posted By: 55allis
Date Posted: 18 Aug 2024 at 12:24am
|
What’s wrong with the d14 to part it out? ------------- 1955 AC WD45 diesel with D262 repower, 1949 AC WD45 |
Posted By: Gary
Date Posted: 18 Aug 2024 at 3:58am
|
Nice haul Still got the Auction Tags hanging off them ! G |
Posted By: jaybmiller
Date Posted: 18 Aug 2024 at 6:21am
hmm... 'needed' the tractor and plow to see HOW the adapter mounts ???? ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: ACinSC
Date Posted: 18 Aug 2024 at 6:59am
| I see D 12 stickers on it. Nicest parts tractor I've ever seen. Thanks for sharing |
Posted By: PaulB
Date Posted: 18 Aug 2024 at 7:19am
|
Not a genuine Allis Chalmers 3pt adapter. Some companies aftermarket knock off. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: jaybmiller
Date Posted: 18 Aug 2024 at 7:52am
|
OK, I have to know HOW did you decide it wasn't 'true orange' ? ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: PaulB
Date Posted: 18 Aug 2024 at 8:10am
True Allis Chalmers aficionados would see #1 it doesn't have a genuine removable AC snap coupler eye, #2 the lift links are generic shop made items, #3 generic top link mount, #4 looks to be CatII lower link balls, The genuine Allis Chalmers CA,D10/12 adapter will have CatI balls, #5 the cross bar would have a mount for the top link that would be used if it wasn't a PTO implement. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
jaybmiller wrote:Posted By: Fred in Pa
Date Posted: 18 Aug 2024 at 8:57am
I bought this one because it will do what I want . ------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |
Posted By: David Maddux
Date Posted: 18 Aug 2024 at 9:19am
| Cute little rascal! |
Posted By: Brian G. NY
Date Posted: 18 Aug 2024 at 9:47am
|
This is a real A-C Cat. 1 3PH adaptor. The top link on this one attaches to the cross bar between the two main arms for use with non PTO equipment. The top link (beaming tube) on another model made for PTO equipment connects to a bracket on the tractor like any common 3PH. Fred's after market adaptor appears to be one of the better ones.  A-C also made a Heavy Duty (category 2) adaptor which looks similar but is made of much heavier materials.
|
Posted By: Brian G. NY
Date Posted: 18 Aug 2024 at 10:11am
|
This is a real A-C top-link. Allis calls it a "beaming tube". Nice fancy hand wheel! And an original A-C top link bracket made to clamp on the rocker shaft on the WD and WD-45 tractors.  |
Posted By: PaulB
Date Posted: 18 Aug 2024 at 10:29am
I was getting some of those handwheels made however the degrading quality of the work the foundry was doing as each successive generation took over the business has made me decide I have what I need and it's not worth it to continue getting NLA parts made anymore. Now the great grandsons are running the business and they don't see the need to produce the quality that their great-grandfather was doing, they only have to do better than the Chinese. The handwheels I have will fit right onto a generic CatI toplink. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |