Farm Equipment - 7060 pwer shift or director

Print Page | Close Window

7060 pwer shift or director

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=202743
Printed Date: 23 Nov 2024 at 1:06pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7060 pwer shift or director

Posted By: Mattman
Subject: 7060 pwer shift or director
Date Posted: 17 Aug 2024 at 6:42am

I am looking to purchase a 7060. I want to pull in the under 13 weight class. I have 2 questions. How can I tell power director from power shift? Which would be better for pulling? I have a 7040 with high, low, and park on the right console and the two buttons on the floor for high and low. I always assumed this was a power director but maybe I am wrong. A lot of bad information out there! Thanks in advance!

Replies:

Posted By: bigal121892
Date Posted: 17 Aug 2024 at 8:20am

Your 7040 is a power director. A power shift, would have nothing on the floor, instead everything would be on the right hand console. The power shift lever, would be to the left of the high, low, park lever, and would have six positions. I don't know which would be better for pulling.

Posted By: Mattman
Date Posted: 17 Aug 2024 at 8:45am

Thank you. That is what I assumed. I'm also assuming the powershift has clutch packs that would cause problems when pulling.