WTB : resister
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Classifieds
Forum Description: For sale or wanted items
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=202694
Printed Date: 22 Sep 2024 at 12:31am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WTB : resister
Posted By: dr p
Subject: WTB : resister
Date Posted: 13 Aug 2024 at 3:59pm
| got all the electrical parts except the resister to make the fast wrap work, hopefully. part number is 529761. and there is a mica washer on top of it 529765. I have to believe it isn't a specially made resister. Numbers off an old one are ohmite 43386 1(upside down horseshoe) +_ 5% Y-50. |
Replies:
Posted By: jaybmiller
Date Posted: 13 Aug 2024 at 5:09pm
|
That a 1 ohm , probably '50 series' ? A picture will sure help nail down a perfect part for you. ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: PaulB
Date Posted: 13 Aug 2024 at 5:46pm
|
Remember that the fast wrap and #10 balers were made to be compatible with a 6 volt tractor. In one of my baler manuals I seem to remember reading something about what was needed to change for a 12 volt tractor.
------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: dr p
Date Posted: 13 Aug 2024 at 7:37pm
| It is a resistor toggle switch. Found one of them but it is in one of those cool old cardboard round containers. Need to figure how to get it out without destroying the container |
Posted By: im4racin
Date Posted: 13 Aug 2024 at 9:23pm
| That sounds like Schrödinger's cat! |
Posted By: 55allis
Date Posted: 13 Aug 2024 at 11:12pm
Love those old cardboard cylinders, I even have an Allis Chalmers hand cleaner cardboard cylinder. Sorry for getting off topic but I was starting to think I was the only one who cared…   ------------- 1955 AC WD45 diesel with D262 repower, 1949 AC WD45 |
dr p wrote:Posted By: Mikez
Date Posted: 14 Aug 2024 at 8:40am
| Iv carefully used old can opener or carefully used a sharp knife. Tried ether top or bottom. Still looks ok to set on shelf if done carefully enough |
Posted By: dr p
Date Posted: 14 Aug 2024 at 4:24pm
| you know the john deere people aren't smart enough to quote quantum superposition theory |
Posted By: Mikez
Date Posted: 18 Aug 2024 at 7:25pm
|
Posted By: dr p
Date Posted: 18 Aug 2024 at 8:11pm
| Thanks mike |
Posted By: Mikez
Date Posted: 18 Aug 2024 at 9:49pm
| Welcome |
Posted By: Mikez
Date Posted: 01 Sep 2024 at 7:38am
| Why don’t your friend come on this forum and interact himself. And provide pictures and info |
Posted By: dr p
Date Posted: 01 Sep 2024 at 7:03pm
| Thanks mike. At least i got a bump |