2900 engine
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=202488
Printed Date: 23 Nov 2024 at 11:55am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 2900 engine
Posted By: CW2 Ryno
Subject: 2900 engine
Date Posted: 29 Jul 2024 at 3:13pm
Question for you all, I haven’t had time to research but I have a 180XT that I picked up for a reasonable price that the engine is rusted badly internally. I haven’t dropped the pan yet to look at the crank. But based on the amount of rust on the lifter end of the pushrod I’m thinking it’s going to be bad. Found a 2900 out of a Combine that was a running engine and stored inside. From what I assume the engine would work but would need the front and rear covers swapped and I assume oil pump, and possibly injection pump depending on if the governors are different.
Am I thinking correctly?
|
Replies:
Posted By: DrAllis
Date Posted: 29 Jul 2024 at 3:31pm
|
Injection pump is probably fine, but may need the low idle and high idle speeds adjusted, which is easy. WHICH 2900 engine and what model Gleaner combine and YEAR would be helpful.........
|
Posted By: CW2 Ryno
Date Posted: 29 Jul 2024 at 8:02pm
ENGINE
SERIAL NO
2D-52837
Hard to read the model. Waiting on the seller to respond
|
Posted By: DrAllis
Date Posted: 29 Jul 2024 at 8:14pm
|
Means nothing to me. What did it come out of?? year and model.
|
Posted By: CW2 Ryno
Date Posted: 23 Aug 2024 at 6:45pm
|
Sorry for the slow reply that engine sold, found another out of a M2 combine. I assume swap all parts from the tractor engine over and it should work?
|
Posted By: DrAllis
Date Posted: 23 Aug 2024 at 8:15pm
|
I'd assume so, but you haven't told me what YEAR M-2 or WHICH 2900 engine. 120 HP was standard and 130 HP was an option in 1978 and newer.
|
Posted By: CW2 Ryno
Date Posted: 23 Aug 2024 at 8:28pm
I’m having trouble getting information out of the scrappers, the engines 4 hours south of me so relying on pictures.
Appreciate all the assistance!
|
|