Farm Equipment - 3 position light switch

3 position light switch

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=20232
Printed Date: 09 Feb 2025 at 6:22pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 3 position light switch

Posted By: Charlie175
Subject: 3 position light switch
Date Posted: 02 Nov 2010 at 7:58am

I need to replace the original on my B as it's just falling apart.

The ones I see online look different than what I have, so do the standard 3 position switch universally work and wire up the same?

This is a typical one shown at Steiner

http://www.steinertractor.com/ACS139-3-position-light-switch-fits-b-c-ca-g-wc-wd-wd45-all-with-cutout-on-generator - http://www.steinertractor.com/ACS139-3-position-light-switch-fits-b-c-ca-g-wc-wd-wd45-all-with-cutout-on-generator

-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD

Replies:

Posted By: RichinWis
Date Posted: 02 Nov 2010 at 8:21am

Yes they work the same, but if you want an exact original they are $75.00 from Tony C out west.

Posted By: Charlie175
Date Posted: 02 Nov 2010 at 8:49am

thanks

-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD

Posted By: Kip-Utah
Date Posted: 02 Nov 2010 at 11:56am

I have an excellent original one that I'll sell you for $45.00 freight included.

208-731-3324 Kip

-------------
HANSEN'S OLD ORANGE IRON. Showing, Pulling, & Going!!

Posted By: Steve in NJ
Date Posted: 04 Nov 2010 at 8:51am

We sell our rebuilts/exchange. As long as your core is good for me to rebuild, $48. exchange w/o rod n' knob, $55. w/rod and knob. $85. outright complete w/new rod and knob. Be careful of the aftermarket one out there. It doesn't fit well in some of the Ammeter boxes according to our customers. I don't sell the aftermarket. Only the original round Delco with fuse tower. There was also a replacement 3 pos. switch that AC used as a fill-in for the Delco during production. That switch was made by Indak. Its rectangular in shape similar to the aftermarket one out there, but a fuzz smaller. Drop us a line if interested....

mailto:Steve@B&B - Steve@B&B

Posted By: Charlie175
Date Posted: 04 Nov 2010 at 8:54am

Thank you guys for the response. I will see what my options are shortly

-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD