B motor
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=202287
Printed Date: 23 Nov 2024 at 6:40pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: B motor
Posted By: acd17toy
Subject: B motor
Date Posted: 15 Jul 2024 at 6:07pm
|
What is the cold valve clearnce setting on a 125 cu engine?
|
Replies:
Posted By: DrAllis
Date Posted: 15 Jul 2024 at 6:46pm
| .015" cold |
Posted By: steve(ill)
Date Posted: 15 Jul 2024 at 6:48pm
|
book says .010 HOT ......... i normally do .012 cold .... .014 is OK to some.
---yea... should be 10 thou.. not 1.  ------------- Like them all, but love the "B"s. |
Posted By: HudCo
Date Posted: 15 Jul 2024 at 7:35pm
| better loose on a hot day than to tight |
Posted By: Gary
Date Posted: 16 Jul 2024 at 5:42am
|
Posted: 10 hours 48 minutes ago at 7:48pm book says .0010 HOT ......... i normally do .012 cold .... .014 is OK to some. Steve Your book is different than what mine says. Mine says .010" clearance at normal operating temp. at .0010 ( 1 thou. ) would seem a little tight. G ..................................................................... In comparison, D-10 and D-12 Operators Manual: Engine at Normal Operating Temp. Intake Valves at .009", Exhaust Valves at .015" HOT |