HD5 Sales Add video
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=202132
Printed Date: 23 Nov 2024 at 2:45am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: HD5 Sales Add video
Posted By: Coke-in-MN
Subject: HD5 Sales Add video
Date Posted: 05 Jul 2024 at 11:59am
|
HD5 - AC add video from way back https://youtu.be/lBn1g_xlhVs?si=n_STn3xAjaDFDib_" rel="nofollow - https://youtu.be/lBn1g_xlhVs?si=n_STn3xAjaDFDib_ ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Replies:
Posted By: Fafarms
Date Posted: 23 Aug 2024 at 2:25am
| Hi, I noticed you a lot of knowledge about the hd5 transmission from another thread. I am wondering if you have the bearing numbers or specs for input and output bearings for the transmission. I am also wondering if you know of any good parts sources please let me know. Thanks. |
Posted By: gemdozer
Date Posted: 23 Aug 2024 at 6:17am
| I have some used HD5 parts if I can help |
Posted By: Coke-in-MN
Date Posted: 23 Aug 2024 at 10:36am
|
All the parts can be matched as bearings that can be found in open market that are used on AC machines - well almost - the Link-Belt bearings on outboard axle are not common nor are the cone bearing used on front idlers . I would need to check my books to see if i wrote numbers down , but as I had access to good suppliers - most times i just gave them the sizes and bearings showed up the next day . Input was easy to find - the output end is a double row radial bearing (and kind of expensive) last one I replaced I got from a customer I serviced who rebuilt clutches and transmissions - believe it was around $150 back then . ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Posted By: Ray54
Date Posted: 23 Aug 2024 at 11:52am
It has been well over 20 years since I put all new bearing in my HD 5 transmission, but all bearings came from bearing supply house. I don't remember needing anything but shifter linkage from Allis Chalmers parts.
|
Fafarms wrote:Posted By: orangeman
Date Posted: 23 Aug 2024 at 5:41pm
|
Top machine in its day! A real workhorse. Imagine if it was updated to today's standard! Orangeman
|
Posted By: ecosse23
Date Posted: 12 Sep 2024 at 2:28pm
Thanks for posting, rather than the quick clip I expected, it's almost like a short feature film! I guess they had a decent promotional budget so they could stretch to a 15 minute advert.
 |