Farm Equipment - CA or ED40 Hand Clutch friction disc thickness

Print Page | Close Window

CA or ED40 Hand Clutch friction disc thickness

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=202098
Printed Date: 08 Jul 2024 at 5:07pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: CA or ED40 Hand Clutch friction disc thickness

Posted By: John426
Subject: CA or ED40 Hand Clutch friction disc thickness
Date Posted: 03 Jul 2024 at 3:47am

I have to replace the clutch plate of the hand clutch on my ED40.

I think it is the same than the CA

I would like to know the total thickness of the clutch plate with new friction.

I think this is very important to obtain the right gap after assembly, and don not have to machining the ears to reach the 0,05" gap under pressure.

Replies:

Posted By: Gary
Date Posted: 03 Jul 2024 at 5:30am

Hi John

Have you seen the Post in the Farm Equipment Knowledge Base section, page 2.

Lots of info there from Greg Lawler.

Gary

https://photos.google.com/share/AF1QipNmvFVC1Hc3h0hiNz2BbJBRNy6f1Cmoz_diCBsIxEZMMvioKVnnqpFMzoIQRvzDsQ?key=cW9ra3hqWnFLU1ZBTWpiMWhMU0RyYld5ZTZvTDN3" rel="nofollow - https://photos.google.com/share/AF1QipNmvFVC1Hc3h0hiNz2BbJBRNy6f1Cmoz_diCBsIxEZMMvioKVnnqpFMzoIQRvzDsQ?key=cW9ra3hqWnFLU1ZBTWpiMWhMU0RyYld5ZTZvTDN3