Loader bucket pin bore diameter
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=202067
Printed Date: 05 Jul 2024 at 10:24pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Loader bucket pin bore diameter
Posted By: structures
Subject: Loader bucket pin bore diameter
Date Posted: 01 Jul 2024 at 10:25am
|
I’m making a spear for the 500 loader. When making the bracket bores for the pin anybody got an idea for the diameter? It’s a 1” pin. I measured an old lightly used allis bucket at 1.02”. Some pins I measured were an 1” or even a few thou over an 1”. Anybody got advice? Thinking of going 1 1/64” drill bit. ------------- Robert http://www.allischalmers.com/forum/forum_posts.asp?TID=82702&KW=structures&title=structures-1964-allis-d15-series-ii" rel="nofollow - 1964 D15 Series II |
Replies:
Posted By: Randy Magnum
Date Posted: 01 Jul 2024 at 10:50am
| I machine parts for tongs and lifting devices quite often, and .015 is the common clearance. |
Posted By: Gary (sw Wis.)
Date Posted: 02 Jul 2024 at 7:56am
|
When I built a quick attach for my WD45I used a die grinder and just got them to fit. It keeps the slop out of it. ------------- 190XT - D17 - D14 - WD45 w/loader - WD - (2)B110 - 616H - 610 - B-208 - WD with 190 Mounted Corn Picker - All Crop 60 |
Posted By: jaybmiller
Date Posted: 02 Jul 2024 at 8:14am
|
best go 1/16" more as you have 4 pins to lineup and I bet the frame ain't 100% laser level perfect ?? ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: IBWD MIke
Date Posted: 02 Jul 2024 at 8:16am
X-2!
|
Randy Magnum wrote: