Farm Equipment - 200 dual PTO removal

Print Page | Close Window

200 dual PTO removal

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=201666
Printed Date: 23 Sep 2024 at 2:34am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 200 dual PTO removal

Posted By: Fritz
Subject: 200 dual PTO removal
Date Posted: 05 Jun 2024 at 1:21pm

First off , thanks for the advice on the wheel wedges, I was able to procure a set of puller bolts and they popped right off.
Now I’m trying to roll the trans out from under the deck, and am to the step of removing the hitch and the PTO with a slide hammer. Except the service book I have does not show the two speed PTO that I have. If just pull these bolts out, will the hitch assembly come off?
Thanks, Fritz

Replies:

Posted By: DrAllis
Date Posted: 05 Jun 2024 at 3:48pm

The PTO gears are in the lift arm housing, not the hitch. Just remove all the external bolts that go around the housing (9 ?) and slide it right off. The lower draft arms do NOT need to be removed for any reason unless you want more work to do. Pull the lower pins on the lift links and take the lift arms with the lift arm housing.