Farm Equipment - Hi-Low range lever on a 220

Print Page | Close Window

Hi-Low range lever on a 220

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=201605
Printed Date: 23 Sep 2024 at 3:18am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Hi-Low range lever on a 220

Posted By: Kevin210
Subject: Hi-Low range lever on a 220
Date Posted: 02 Jun 2024 at 8:10am

Any one know if there's a bushing on the high low
gear lever on a 220..

Replies:

Posted By: DrAllis
Date Posted: 02 Jun 2024 at 8:24am

I don't think so. I do know I have never replaced one.

Posted By: SteveM C/IL
Date Posted: 02 Jun 2024 at 10:34am

It isn't like it got much use to wear it from pivoting.

Posted By: injpumpEd
Date Posted: 03 Jun 2024 at 7:24am

There is a bushing, but like mentioned, it moves so little, wouldn't think it'd ever wear out. I actually honed the one on mine out and polished the shaft so it will move freely. It shows it on partsbooks I think, and maybe the bushing is still avail if you actually need one. If not in Agco, parts depot would likely have some. Otherwise mcmaster carr has bushing stock to make them from. What is the issue with yours?

-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!