Farm Equipment - 442 baler

Print Page | Close Window

442 baler

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=201585
Printed Date: 23 Sep 2024 at 3:25am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 442 baler

Posted By: iowaman
Subject: 442 baler
Date Posted: 31 May 2024 at 12:12pm

I have a 442 baler that I have been told uses the same knotter assembly as New Holland balers. Which New Holland model would be similar to the 442?

-------------
You only live once. But if you live right once is enough.

Replies:

Posted By: Mikez
Date Posted: 31 May 2024 at 7:38pm

What do you need. We have some stuff

Posted By: DanielW
Date Posted: 01 Jun 2024 at 7:50am

Yup, same knotters as used by NH. A NH 273 or any NH from about the late 50's to the late 80's will have the same Rasspe knotter (Rasspe model 6004 if I remember right). Deere also used/uses Rasspe knotters - a slightly different model than NH, but many parts will interchange.

Posted By: RP Farms
Date Posted: 01 Jun 2024 at 8:22am

Rasspe Knotters. I got a 442 baler this spring and while it is fairly straight forward and simple I do recommend getting an owners manual. We just baled with ours for the first time this week, it ran like a champ aside from where I made the windrows too thick.

Agco parts has the parts book online,

https://parts.agcocorp.com/us/en/apbsearch?q=agcoallis%2F9001526d%2Fl&c=00-00&name=442%20SMALL%20RECTANGULAR%20BALER" rel="nofollow - https://parts.agcocorp.com/us/en/apbsearch?q=agcoallis%2F9001526d%2Fl&c=00-00&name=442%20SMALL%20RECTANGULAR%20BALER