Farm Equipment - Allis Chalmers plow

Print Page | Close Window

Allis Chalmers plow

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=201496
Printed Date: 24 Nov 2024 at 7:44am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis Chalmers plow

Posted By: acd17toy
Subject: Allis Chalmers plow
Date Posted: 25 May 2024 at 6:17pm

Going to look at a 3 bottom pull type plow seller said that it is on rubber tires. What model would it be?

Replies:

Posted By: DiyDave
Date Posted: 25 May 2024 at 7:45pm

Would need more info. Measure bottom width is a start.

-------------
Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need!

Posted By: PaulB
Date Posted: 25 May 2024 at 9:09pm

For any Allis Chalmers plow whatever size and model number bottoms are on it will have nothing to do with the model of the plow frame.

For trailer plows look for casting number on the wheel hubs, then a parts book will identify the frame model.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY

Posted By: Gary
Date Posted: 26 May 2024 at 5:45am

In this Forums "Farm Equipment - Knowledge Base" Section is a post titled "AC Plows Parts 101"

In that post is a Video identifying Allis Pull Type Plows.

Gary

https://www.youtube.com/watch?v=4U9PPauc4EA" rel="nofollow - https://www.youtube.com/watch?v=4U9PPauc4EA
..........................................................................

There is also this Post from 2011:

https://www.allischalmers.com/forum/1-or-2-or-4-plow-id_topic40217.html