The big move (for me)
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=201396
Printed Date: 24 Nov 2024 at 7:46am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: The big move (for me)
Posted By: Lon(MN)
Subject: The big move (for me)
Date Posted: 19 May 2024 at 7:57am
|
I am in the process of moving my collection to Wisconsin. 220 miles one way. The question I have is scrap parts, sell parts, or move parts. Many parts I will move but i hope to find homes for some of it. All my left over D19 parts need a new home. Two empty transmission casting, Three torque tubes, one still has the hydraulic pump in it. Wide front parts, gears and a few other parts. I could put this in classified but thought I would put it here as an Allis express if anyone is headed to Wausau from Mpls and willing to move some of my stuff. A new building for my collection is under construction now and hope to be completed in August. ------------- http://lonsallischalmers.com |
Replies:
Posted By: Fred in Pa
Date Posted: 19 May 2024 at 8:54am
|
What's the cost of hauling , loading and unloading time .Are the parts worth the time and storage space . When moving its a good time to let go . Just my opinion .
------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |
Posted By: Steve in NJ
Date Posted: 19 May 2024 at 9:05am
|
Boy, sometimes that's a tough decision. I moved a couple times over the years, and the second time I moved, I filled the steel dumpster. In my younger years I did a lot of engine building. I had blocks and heads and you name it I had at least 3 of each. That second move I just decided to junk the non hi-performance stuff ie-blocks, heads etc. to make the move easier. It made it much easier to move, but I did regret throwing out some of the stuff I could've used down the road. Oh well....... Steve@B&B ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: PaulB
Date Posted: 19 May 2024 at 10:16am
|
After many years of parting out B,C&CA tractors I was in the same situation in 2008. I looked at it this way; I sold off as much as I could a below market value. Anything that was run of the mill and easy to replace got scrapped. Then I moved the rest. However there were many NOS parts that I would have thought that someone sometime would have needed and I wish I hadn't stored taking up space for more than 15 years. As I am now most likely approaching the end of my time and now have my farm truck with the dump bed back running, I will be getting serious about scrapping ANYTHING that I can't justify a use for. I wish I'd scrapped more stuff years ago. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: Grant Forsythe
Date Posted: 19 May 2024 at 8:11pm
|
Lonnie, Bring it all to Hutchinson mn show in july. ------------- The Unstyled Collector |
Posted By: IBWD MIke
Date Posted: 20 May 2024 at 6:31am
We could use a few more details on the move. Building the shed over at Ted's?
|
Grant Forsythe wrote:Posted By: Pat the Plumber CIL
Date Posted: 20 May 2024 at 7:26am
|
Bring it to Hutch, Lon's bargain discount tractor parts collection at the swap meet. If there is anything left , I am sure Lad, Laddy , Matt Jordan and a few others would haul it away for you. For the right price that is. ------------- You only need to know 3 things to be a plumber;Crap rolls down hill,Hot is on the left and Don't bite your fingernails 1964 D-17 SIV 3 Pt.WF,1964 D-15 Ser II 3pt.WF ,1960 D-17 SI NF,1956 WD 45 WF. |
Posted By: Fred in Pa
Date Posted: 20 May 2024 at 10:23am
|
How far to Hutch , and how many loads . ------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |
Posted By: Tim NH
Date Posted: 20 May 2024 at 5:45pm
|
Lonn, I've been wanting to let you know I need a nose piece for a WD45. I'll be at Hutch this year. ------------- 1950 WD 1959 D14 1955 WD45 1976 7000 B 207 |
Posted By: mdm1
Date Posted: 20 May 2024 at 7:59pm
|
Lon are you moving back home? Be closer to my tractors now. I've seen your collection. Lots to move. Ted may have some room. ------------- Everything is impossible until someone does it! WD45-trip loader 1947 c w/woods belly mower, 1939 B, #3 sickle mower 1944 B, 2 1948 G's. Misc other equipment that my wife calls JUNK! |
Posted By: Lon(MN)
Date Posted: 21 May 2024 at 7:02am
|
I have a 14 foot trailer. My first run through was about 30 loads. I think a dumpster is in order. Torque tubes and finales are not worth moving. Engines with cracks will go to scrap 20 radiators are going this week. Hard to throw things away. The story is my Son bought the home place where I grew up, my Dad grew up, and my grandfather farmed. I am putting up a new building and moving my collection next to his property. My house is for sale and when that sells I will build a new Shouse or barn dominion. I will continue working on Allis until I can't. My collection will then be my Sons. ------------- http://lonsallischalmers.com |
Posted By: Lon(MN)
Date Posted: 21 May 2024 at 7:06am
|
As a side note. The WD my dad bought new, The Ford 8N my Grandfather bought new, and the 1972 IH pickup my Dad bought new are coming home also. To see pictures check out my website lonsallischalmers.com. ------------- http://lonsallischalmers.com |
Posted By: PaulB
Date Posted: 23 May 2024 at 7:03am
|
When to the scrap yard yesterday and got just over $200/ton. Came home and started next load, crushed down an AllCrop 40 so it would fit on the truck that I'd tried to give away, those that had interest, expected FREE delivery along with the free combine. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: AllisFreak MN
Date Posted: 23 May 2024 at 7:46am
Sorry to hear you're moving to Wisconsin. ------------- '49 A-C WD, '51 A-C WD, '63 A-C D17 Series III, 1968 A-C One-Seventy, '82 A-C 6060, '75 A-C 7040, A-C #3 sickle mower, 2 A-C 701 wagons, '78 Gleaner M2 |