Construction and other equipment - Track master pin and bushing for HD4 dozer

Print Page | Close Window

Track master pin and bushing for HD4 dozer

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=201356
Printed Date: 06 Apr 2025 at 6:51am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Track master pin and bushing for HD4 dozer

Posted By: Randaleky
Subject: Track master pin and bushing for HD4 dozer
Date Posted: 15 May 2024 at 10:04pm

Anyone have two track chain master pins and two bushings for Allis HD 4 dozer . Or a part number and place to order them . I had good chains on a parts loader but had to burn the master pins out . My bad dozer track chains were worn to where the traming was jolting very bad .

Replies:

Posted By: orangeman
Date Posted: 16 May 2024 at 8:02am

Here you go Randal:

Bushing - P/N 234950

Pin - P/N 234951

Master Pin - P/N 234952

Reference - Allis Chalmers Dealers Part Catalog Model H4 and HD4 Tractors Form D-65 dated 2-67.

HTH's ~ Orangeman

Send a PM to discuss potential places to secure the master Pin and Bushing.

Posted By: orangeman
Date Posted: 16 May 2024 at 8:10am

Additional Note: Based on the H4- HD4 Tractors Revised Parts Information Book there was a revision to the Track Group - dated 4-72. My understanding is that Springfield was producing a track with a thicker vertical link height (I.e. heavy duty chain) similar to the Berco Aftermarket chain for the H4 and HD4 crawler, loader and dozers. There was no noted revision to the PIN or the Bushing for the track in the reference noted above.

HTH's ~ Orangeman

Posted By: Randaleky
Date Posted: 16 May 2024 at 10:07am

Thanks, Orangeman , These numbers will help. Where is the best places to find these Parts
Thanks

Posted By: orangeman
Date Posted: 16 May 2024 at 12:18pm

Randal; You have mail - phone number on second reply is the one to use. Sorry for the confusion.

Posted By: DougG
Date Posted: 16 May 2024 at 1:56pm

Kwik-Parts- they have a website- this is the left over business of Oscar Cooke Fulton Mo - he dealt with Allis Chalmers heavy equipment in it Hey Day, good people - know their stuff

Posted By: Randaleky
Date Posted: 19 May 2024 at 1:03pm

Thanks . I will check