Farm Equipment - CA Aftermarket Muffler Mounting Hole Absent

Print Page | Close Window

CA Aftermarket Muffler Mounting Hole Absent

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=201336
Printed Date: 28 Nov 2024 at 2:47am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: CA Aftermarket Muffler Mounting Hole Absent

Posted By: dfwallis
Subject: CA Aftermarket Muffler Mounting Hole Absent
Date Posted: 14 May 2024 at 8:38am

The new manifold doesn't have the bottom hole drilled. Should I drill and tap one or is one bolt enough? It seems like it should be fine as long as the muffler material is intact (stainless steel muffler).

-------------
1952 CA13092

Replies:

Posted By: steve(ill)
Date Posted: 14 May 2024 at 9:50am

I think most of my "B" tractors were setup with only 1 bolt.. Two would make it more stable, but the one seems to work as long as you dont bump it too hard.

Some manufactures put the extra hole in the manifold for the CA muffler... same manifold fits the B-C which only has one hole.

-------------
Like them all, but love the "B"s.