Farm Equipment - Hydraulics

Print Page | Close Window

Hydraulics

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=201273
Printed Date: 23 Sep 2024 at 7:10am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Hydraulics

Posted By: cwsac.1
Subject: Hydraulics
Date Posted: 10 May 2024 at 5:44am

I got a WD 45 wondering how to bleed the system particularly lift cylinders. Manual gives me a procedure that doesn’t seem to work. Any Intel on bleeding sequins would be greatly appreciate it.

Replies:

Posted By: DrAllis
Date Posted: 10 May 2024 at 6:38am

Stand on the left lift arm. Raise it to the top fully and let the pump hammer its way to relief. Lower lift arms fully. Do this several times. You are bled. Re-check oil level.

Posted By: cwsac.1
Date Posted: 10 May 2024 at 6:55am

Yeah, I did what you said everything except for stand on them I put a new packing in so they were emptied if that makes a difference

Posted By: cwsac.1
Date Posted: 10 May 2024 at 6:56am

I was unable to make them leak by the packing nuts