Construction and other equipment

Print Page | Close Window

govenor

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=201120
Printed Date: 18 Jun 2024 at 9:21am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: govenor

Posted By: lost in h3
Subject: govenor
Date Posted: 30 Apr 2024 at 2:28pm

New engine in H3 with rebuilt carburetor and govenor. Engine hunts when first started then settles down. Hunts some when under a load like going up a hill. Anyone with any ideas.

Replies:

Posted By: DiyDave
Date Posted: 30 Apr 2024 at 3:29pm

governor linkage, bend to adjust...

-------------
Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need!

Posted By: DrAllis
Date Posted: 30 Apr 2024 at 3:45pm

SHORTEN the link rod from governor arm to carb 1/8" by putting a couple of extra bends in it.

Posted By: lost in h3
Date Posted: 03 May 2024 at 4:38pm

DrAllis

Not sure if my reply went through so using general forum. I think you may be correct on governor so I will continue to trouble shoot.