Farm Equipment - 7030 transmission fluid transferring

Print Page | Close Window

7030 transmission fluid transferring

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=200797
Printed Date: 01 Dec 2024 at 4:46am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7030 transmission fluid transferring

Posted By: Orange & silver farm
Subject: 7030 transmission fluid transferring
Date Posted: 09 Apr 2024 at 4:39am

7030 is transferring trans oil to rear end. I know this has been discussed before. I pulled filters and screens underneath left and right they were pretty clean. Will get new agco. Figured I need to change the seal to stop the bypassing of oil. Anyone have part number of the seal and is there anything else I'll need? (Gaskets) How big of a job is it to change? Am I going about it right so far? Any suggestions greatly appreciated thanks and first time poster

Replies:

Posted By: Ron(AB)
Date Posted: 10 Apr 2024 at 10:50pm

Welcome to the forum.

Yes it is probably best to do as many seals as you can when you are in there.

-------------
405, 7000, 7050, 8050, 8070, L3, 2300 & 2600 disk

Posted By: DrAllis
Date Posted: 11 Apr 2024 at 3:35pm

70265398 is the seal causing the trouble. Be sure to wrap one layer of electrical tape on the shaft splines to prevent cutting the seal when installing. Other parts needed: two- 70269665 Orings.....one- 70261282 gasket.......one-70924921 oring. Reuse all the seals you can as many are obselete i am told.

Posted By: Orange & silver farm
Date Posted: 11 Apr 2024 at 4:51pm

Thank you that's what I was answer I was looking for. Wanted to get seals before I started repair