7020
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=200673
Printed Date: 01 Dec 2024 at 6:26am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7020
Posted By: CDN 400
Subject: 7020
Date Posted: 02 Apr 2024 at 12:34pm
just trying a picture.
|
Replies:
Posted By: AC7060IL
Date Posted: 02 Apr 2024 at 2:08pm
|
CDN 400, congratulations on uploading your 7020 photo. Good looking AC tractor. What year is it? PD or PS trans? Which farm jobs does it do? |
Posted By: CDN 400
Date Posted: 02 Apr 2024 at 4:58pm
|
[QUOTE=AC7060IL]CDN 400, congratulations on uploading your 7020 photo. Good looking AC tractor. What year is it? PD or PS trans? Which farm jobs does it do? I just bought it in December but it's a 1980 PD transmission. Its just going on light duty planting ,discbine and 575 New Holland baler. I've had it in the shop for the last couple months working on it and doing some upgrades. I have more pics but I want to try and make them a little bigger. |
Posted By: CDN 400
Date Posted: 02 Apr 2024 at 5:16pm
try again
|
Posted By: AllisFreak MN
Date Posted: 02 Apr 2024 at 5:38pm
|
Looks like a nice straight tractor. ------------- '49 A-C WD, '51 A-C WD, '63 A-C D17 Series III, 1968 A-C One-Seventy, '82 A-C 6060, '75 A-C 7040, A-C #3 sickle mower, 2 A-C 701 wagons, '78 Gleaner M2 |
Posted By: CDN 400
Date Posted: 02 Apr 2024 at 5:40pm
more
|
Posted By: CDN 400
Date Posted: 02 Apr 2024 at 5:42pm
|
Posted By: CDN 400
Date Posted: 02 Apr 2024 at 5:44pm
|
Posted By: CDN 400
Date Posted: 02 Apr 2024 at 5:45pm
|
Posted By: CDN 400
Date Posted: 02 Apr 2024 at 5:55pm
| If anyone sees anything wrong or shouldn't be done please let me know. What I done was relocate the precleaner under the hood and added a straight pipe just for improved visibility for planting. Added a mount for monitors and a trailer plug with signal lights. Went from 20.8's to 18.4's ,painted all the rims and cast centers ,painted the inside of the cab and new cab kit. New hytrans and agco filters in the rear and fixed the ac. I also cut a hole in the back of the cab for monitor cables. Only thing I can't find is a set of 9 bolt hubs for axle duals. If we like it we will paint it all next winter. |
Posted By: plummerscarin
Date Posted: 02 Apr 2024 at 5:58pm
| Very nice. I did the same as you for the trailer plug wire. I am guessing the pie shape plug is to pass a monitor plug and harness through for implements? Neat idea |
Posted By: CDN 400
Date Posted: 02 Apr 2024 at 6:00pm
|
plummerscarin wrote:Posted By: CDN 400
Date Posted: 02 Apr 2024 at 6:09pm
|
Posted By: dp7000
Date Posted: 02 Apr 2024 at 9:24pm
| Super nice. You’ve done a great job. |
Posted By: SteveM C/IL
Date Posted: 02 Apr 2024 at 11:12pm
| Get a tiny little chain at hardware store and zip tie it to fill tube plug and one of those control cables. That way you won't drive off with it just laying there after adding and "plant" it. New is stupid $$$. No luck at salvage yards. |
Posted By: AC 426 power
Date Posted: 03 Apr 2024 at 9:14pm
Done that before luckily for me it stayed where it was at miraculously. |