HD11 series B
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=20057
Printed Date: 12 Jan 2025 at 5:26pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: HD11 series B
Posted By: steve aust
Subject: HD11 series B
Date Posted: 29 Oct 2010 at 7:46am
Thought i'd share a  picture My new toy which makes four HD11s an EC two EP'S and have always wanted a series bshe's a tidy straight tractor |
Replies:
Posted By: DMiller
Date Posted: 29 Oct 2010 at 9:21am
| Now that IS a MONESTER!! And no I did intend to misspell it! Nice looking unit, is that a tree pusher/deflector collar on the blade? |
Posted By: Jeff(WD45-SATX-TN)
Date Posted: 29 Oct 2010 at 12:37pm
|
Wish I could get a toy like that. Nice machine you have there.
Planning to clear some of those trees? ------------- 1954 WD45 NF "Iron Tater" |
Posted By: steve aust
Date Posted: 30 Oct 2010 at 7:07am
| yep is a tree pusher we have it chained up so we could angle the blade for transport , machine is going to be used for bush work , I am going to paint the mesh black so I can see through it better . steve |
Posted By: HD6 Merv
Date Posted: 31 Oct 2010 at 12:19am
|
Hi Steve
Nice looking 11B, how about a few more photos of her and the other 11s, plus a few more storys and some s/no.
Mate of mine has 11B 25L149.
Cheers from the other side of the ditch. Merv
|
Posted By: steve aust
Date Posted: 31 Oct 2010 at 7:29am
|
Hi Merv , s/ no of b series 25L 17644 has new track plates,chains,segments and front idlers , I have a bull blade for it and a stick rake , i need to buy an extra valve to work the tilt cylinder might have to try the US as i dont think there are to many b series here? I have to 11ep's in the workshop am building one out of two also had two ec models but sold one last year ( it was my dads he had it since 1975 he did a lot of work with it then i did a lot of work with it after he past away tracks were getting when i sold it ) my brothers have a HD 6 and two HD 3'S there were only twelve hd 3's brought into australia steve |
Posted By: steve aust
Date Posted: 03 Nov 2010 at 6:07pm
 |
Posted By: steve aust
Date Posted: 07 Nov 2010 at 10:35pm
allis projects HD11 EP , M65 grader
|
Posted By: steve aust
Date Posted: 07 Nov 2010 at 10:44pm
 |
Posted By: DMiller
Date Posted: 08 Nov 2010 at 6:16am
| I know it is a motor grader of some variety but what series? in the last photos? |
Posted By: Steve M C/IL
Date Posted: 08 Nov 2010 at 9:44pm
| My brother had an HD11B Fiat-Allis.72 model I think.It was a horse.Would work the pants off a 10K 6C.I ran them both.That 516 with a"P" pump was a sleeper.Tilt blade on the 11B wasn't as well engineered as the Cat though. |
Posted By: Jeff(WD45-SATX-TN)
Date Posted: 09 Nov 2010 at 11:36am
|
Sweet shop! ------------- 1954 WD45 NF "Iron Tater" |
Posted By: Jeff(WD45-SATX-TN)
Date Posted: 09 Nov 2010 at 1:56pm
|
Steve, Thought you might get a kick out of this HD cartoon I did: ------------- 1954 WD45 NF "Iron Tater" |
Posted By: steve aust
Date Posted: 10 Nov 2010 at 4:35am
|
Hi Jeff, Thanks that is a great picture would be good on a tee shirt !! and Hi D miller , the grader is an M65 with a 262 diesel I probably go a bit over board with my projects by stripping the whole machine down to the last bolt and starting again from a bare chassis, the grey piece under the crane in the first shop pic is the start of a hd11 |
Posted By: HD6 Merv
Date Posted: 12 Nov 2010 at 11:32pm
|
Hi Steve.
Great looking shop. Not much left of the 11 under the crane, certainly a ground up rebuild. Other 11ep looks like the earlier series. Later series had the air cleaner in the dash same as the series B. Mate of mine that has that 11B also has a early ep. 11315.
He has bought alot of parts off a guy in kaikohe called Lex Norton who owned serveral ep and series B 11s, he just sold his last 2 11s and has alot of parts for sale. Alot of 11eps and series B tractors were sold in NZ along with the earlier models, and untold HD6s.
Could be worth you having a look on our NZ site trademe under allis chalmers. I know Lex has got a HD5 with blade and rippers on it for sale there as well as alot of HD11 parts.
Thanks for pics, cheers Merv
|
Posted By: GBACBFan
Date Posted: 13 Nov 2010 at 11:35am
|
That lowly little orange Power Unit sure looks out of place in that beautiful shop. I'd suggest you put a few stamps on it and sent it to my house! ------------- "The trouble with quotes on the Internet is that you can never know if they are genuine." - Mark Twain |
Posted By: Tas HD6
Date Posted: 12 May 2015 at 6:28pm
|
hi all, i am looking for a HD11e hydraulic blade pump i think they are a hydrec pump or similar if someone can call me 0431658935 or point me in the right direction not alot of these machines left in Tasmania |
Posted By: AusHD6
Date Posted: 12 May 2015 at 7:40pm
|
Hey Ken Give Brendan up at Phil Hunt AC parts in Tamworth a call on 0267 624466, he is the best you will do for AC gear in Australia, failing that try General Gear in Idaho. Cheers Warren |