Snap coupler for a B
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=20053
Printed Date: 08 Feb 2025 at 6:23pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Snap coupler for a B
Posted By: Jamie NC
Subject: Snap coupler for a B
Date Posted: 28 Oct 2010 at 8:42pm
|
Hi guys, Anyone have some pics of the snap coupler assm. for the B's as I think that I traded for most of one today. What is it worth,and is anyone looking for one. Thanks
Jamie Sigmon ------------- Allis tractor puller CA WC WD D17 |
Replies:
Posted By: CTuckerNWIL
Date Posted: 28 Oct 2010 at 8:46pm
|
From what I remember the drawbar is flipped forward and the bell bolts to the center of it.
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Rick of HopeIN
Date Posted: 28 Oct 2010 at 8:49pm
|
Swimford book shows it but that is the only place I have seen it. Not sure I have seen one actually installed on a tractor.
------------- 1951 B, 1937 WC, 1957 D14, -- Thanks and God Bless |
Posted By: orangereborn
Date Posted: 28 Oct 2010 at 11:40pm
|
Jamie...I have about 10 good pic of the B SC setup in my Pic folder. Can anyone help me send them via the folder/slides/whatever. Too many to post or mail individually....Dale
Orangereborn 964 192nd Ave New Richmond, WI 54017 715-247-3079 715-781-2055 mailto:Orangereborn@hotmail.com - Orangereborn@hotmail.com |
Posted By: Bee
Date Posted: 28 Oct 2010 at 11:52pm
 ------------- Bob, North Carolina 1949 B |
Posted By: CTuckerNWIL
Date Posted: 29 Oct 2010 at 7:26am
|
So did Allis use that "CA" cylinder on all the Snap Couple B's? I can see why there weren't more built if you have to wrestle the drawbar around every time you want to use the Snap Couple set up. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Dusty MI
Date Posted: 29 Oct 2010 at 8:11am
|
Dale, I'd just copy and past 2 or 3 at a time on an e-mail and send them. Dusty ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Posted By: Rick of HopeIN
Date Posted: 29 Oct 2010 at 2:28pm
|
Rockshaft looks like it is mounted too low in the pic. The one in the book mounts above the fender edge and also has two braces to the drawbar mount bolts to help support the load of those arms sticking way back. I would think that thing could rip the fender irons right off if not carefully braced up. Always looked to me like it would really take weight off the front fast since the final drives are not layed back like a CA. Front weight was probably a must. ------------- 1951 B, 1937 WC, 1957 D14, -- Thanks and God Bless |
Posted By: norm[ind]
Date Posted: 29 Oct 2010 at 8:33pm
| we have a BELL FOR SALE original 1-574-342-4545 |