Farm Equipment - 7060 black belly remote valves

Print Page | Close Window

7060 black belly remote valves

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=200325
Printed Date: 04 Dec 2024 at 6:34am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7060 black belly remote valves

Posted By: ryan(IN)
Subject: 7060 black belly remote valves
Date Posted: 15 Mar 2024 at 8:35pm

Working on getting the remote valves working better on our 7060. Replaced the large pin, levers, and the pins on the front of the spools. Man 40+ years of wear and its amazing how they feel now! Third remote detents in lower and raise and goes into float. 1+2 remotes do not detent or go into float. Took the rubber plugs out on the back of the spool and oil came out. I assume valve spool needs resealed.

But, the question is. Why do those two valve not detent or go into float?

-------------
ryan
1984 8070 FWA,1979 7060,1975 7040,1971 190,1960 D-17D,1957 D-14, 196? D-19G, 1975 5040,1971? 160,1994 R62

Replies:

Posted By: 8070nc
Date Posted: 15 Mar 2024 at 9:02pm

Id start with the adjustment inside where you took the plug out. I dont have 7000 series now but it seems that they were an allen screw. My 8070s are a small screwdriver
If that doesnt fix it theres something wrong with the detent mechanism but ive never had one give trouble other than adjustment

-------------
1984 80780
1957 D14
DES 300 with 25000 engine
616 tractor

Posted By: Lynn Marshall
Date Posted: 16 Mar 2024 at 7:57am

With the engine off, you should have those detents in all of the levers. Readjust the cables if you don't.

Posted By: 8070nc
Date Posted: 16 Mar 2024 at 10:23am

If you push the lever forward toward lower and it doesnt detent its not the cables because you have more lever and cable stroke to go to float

-------------
1984 80780
1957 D14
DES 300 with 25000 engine
616 tractor

Posted By: ryan(IN)
Date Posted: 16 Mar 2024 at 12:10pm

Ya I need to unhook a cable on the ones that do not detent and see if I can manually detent reaching up there. Then I know it’s a cable adjustment I guess.

-------------
ryan
1984 8070 FWA,1979 7060,1975 7040,1971 190,1960 D-17D,1957 D-14, 196? D-19G, 1975 5040,1971? 160,1994 R62