Farm Equipment - Retorqueing WD head

Print Page | Close Window

Retorqueing WD head

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=200100
Printed Date: 04 Dec 2024 at 10:00pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Retorqueing WD head

Posted By: Tim NH
Subject: Retorqueing WD head
Date Posted: 04 Mar 2024 at 6:24am

I want to use a crows foot so I don't have to take the rocker arm shaft off. Is this the way you all do it. Thanks Tim

-------------
1950 WD 1959 D14 1955 WD45 1976 7000 B 207

Replies:

Posted By: TramwayGuy
Date Posted: 04 Mar 2024 at 7:21am

If you use a crows’ foot, make sure your torque wrench is at 90 degrees. Otherwise you may overtorque them.

Posted By: Allis dave
Date Posted: 04 Mar 2024 at 8:25am

I have a curved wrench in the shape of a C. It goes up, around and over the rocker arm so you can get the torque wrench on it.