Farm Equipment - 5020 Final Drive Top Bearing

Print Page | Close Window

5020 Final Drive Top Bearing

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=200076
Printed Date: 04 Dec 2024 at 9:40pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 5020 Final Drive Top Bearing

Posted By: mightycondog
Subject: 5020 Final Drive Top Bearing
Date Posted: 02 Mar 2024 at 4:06pm

I'm replacing the top bearing on the final drive. The bearing is located under the steering arm and under the top seal. The new bearing is covered on 2 sides and I'm wondering which is the correct way to press the bearing in? Upon disassembly of the right side, I found there wasn't a bearing present. I have the parts diagram, but it doesn't really show which way the bearing should be pressed in?

Replies:

Posted By: mightycondog
Date Posted: 02 Mar 2024 at 4:21pm

The specific bearing in question is used for the steering and is located below the steering arm.