di7d series 1
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=199854
Printed Date: 23 Sep 2024 at 11:29pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: di7d series 1
Posted By: HudCo
Subject: di7d series 1
Date Posted: 15 Feb 2024 at 7:28pm
|
got another parts tractor for my d17d project i am hoping that the head will be good and the block it belonged to a customer, it ran real bad had a miss fuel leaks every where but it would pull start in 3 feet, couldnt get a starter rebiult very quick so i put the starter of of mine it does spin fast we did the injection pump on it our local pump shop rebiult the pump, pull started agian in just a few feet and sounds excellant , except as soon as we got all the cylinders firing it got so much blow by that it pushes oil out the oil filler doesnt have compression in the radiator so i think iwill have a good head what is the best guess broken rings or bad gasket and deck. i am tradeing this for some labor on there case tractor
|
Replies:
Posted By: AC720Man
Date Posted: 15 Feb 2024 at 9:46pm
I would take the head to a reputable shop and have it checked. That’s really the only way your going to know if it’s good.
-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
Posted By: HudCo
Date Posted: 15 Feb 2024 at 10:45pm
|
if its good its getting all new
|
|