7000 Series Monitor & Controls Mounting
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=199780
Printed Date: 14 Nov 2024 at 7:57am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7000 Series Monitor & Controls Mounting
Posted By: CDN 400
Subject: 7000 Series Monitor & Controls Mounting
Date Posted: 11 Feb 2024 at 2:02pm
| I am just wondering how everyone is mounting monitors and electric controls in there 7xxx series? I don't see a lot of solid structure to mount to, pics would be a big bonus. |
Replies:
Posted By: plummerscarin
Date Posted: 11 Feb 2024 at 3:38pm
My 7040. PO had already drilled the holes so I adapted to it Planter monitor is attached to the roof in the 7045 behind the rear view mirror. There were some existing bolts I adapted to. Note in black belly cabs with all the foam i use longer bolts with sleeves so as not to crush the foam. This is how they did it for the ash tray and light fixture over the hydraulic controls |
Posted By: bigal121892
Date Posted: 11 Feb 2024 at 4:53pm
|
On our 7XXX, built a stand that bolted to the floor, in front of the right lower window, then a single brace back to the cab frame. Sorry don't have any pictures, this was done a long time ago. |
Posted By: Unit3
Date Posted: 11 Feb 2024 at 7:48pm
|
Made a a pole mounted from the right front corner. 1” pipe holds a Trimble 250, Raven 4400, and then the boom function box for the Top Air sprayer. ------------- 2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C |
Posted By: CDN 400
Date Posted: 12 Feb 2024 at 4:40pm
| Thanks for the replies ,they gave me some good ideas to build from. |