Series 1 d17 power steering
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=199715
Printed Date: 24 Sep 2024 at 1:26am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Series 1 d17 power steering
Posted By: Linck182
Subject: Series 1 d17 power steering
Date Posted: 07 Feb 2024 at 5:36pm
|
It appears my d17 that I just acquired does not have power steering. Although it has the fill and cap where you would put the power steering fluid. Below the governor there is just a plate where I would assume the power steering would connect inside, opposite of where the steering shaft goes in. Would it be easy enough to swap parts from my other d17 parts tractor that has power steering?? Thanks
|
Replies:
Posted By: DrAllis
Date Posted: 07 Feb 2024 at 6:09pm
Posted By: AC720Man
Date Posted: 07 Feb 2024 at 9:35pm
If the parts tractor is a series 1 just swap out the front bolster and components. Need a overhead crane to make it easier to do. I rebuilt my series 1 NF diesel PS and no it’s not an easy task.
-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
Posted By: DSeries4
Date Posted: 08 Feb 2024 at 10:26am
I have a complete power steering assembly for a series 1 D17 gas for sale, but I live in Canada. Shipping would be pricey.
-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
Posted By: rtwfarm
Date Posted: 08 Feb 2024 at 5:56pm
|
Got a parts tractor with all the parts you need. 402-469-1738
|
|