Another WD bracket
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=199711
Printed Date: 14 Nov 2024 at 8:06am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Another WD bracket
Posted By: Tim NH
Subject: Another WD bracket
Date Posted: 07 Feb 2024 at 3:25pm
|
I can't figure out where this bracket goes on the tractor. Anybody on here know. Thanks Tim  ------------- 1950 WD 1959 D14 1955 WD45 1976 7000 B 207 |
Replies:
Posted By: Brian G. NY
Date Posted: 07 Feb 2024 at 3:59pm
|
It may be the clip that secures the fuel line and generator cable. Don't know where it fastens; if it is that clip you might be able to find out by following the gas line and generator cable, looking for a handy 1/4" hole.
The one on my WD is long gone. |
Posted By: Tim NH
Date Posted: 07 Feb 2024 at 6:14pm
|
Well that's where I'll start. Thanks Brian. ------------- 1950 WD 1959 D14 1955 WD45 1976 7000 B 207 |
Posted By: Michael Crowe
Date Posted: 07 Feb 2024 at 6:59pm
|
It holds the wiring harness to the fuel line between the carburetor and air cleaner. ------------- The 14th Annual Exclusive AC Swap Meet will be held in Boonville, MO, March 7-8, 2025. See the club website for details: http://www.moacclub.com/ |
Posted By: Allis dave
Date Posted: 07 Feb 2024 at 7:03pm
|
You mean the wiring harness isn't supposed to just drape over the petcock drain? LOL oops mine must be wrong Just funny how few of these little items still exist after 70 years |
Posted By: Michael Crowe
Date Posted: 07 Feb 2024 at 7:11pm
|
I have a few tractors that have it still or otherwise i wouldn’t have known. Most are long gone. ------------- The 14th Annual Exclusive AC Swap Meet will be held in Boonville, MO, March 7-8, 2025. See the club website for details: http://www.moacclub.com/ |
Posted By: Tim NH
Date Posted: 08 Feb 2024 at 5:01am
|
Thank you Michael, I'll install it. Tim ------------- 1950 WD 1959 D14 1955 WD45 1976 7000 B 207 |
Posted By: Lon(MN)
Date Posted: 08 Feb 2024 at 6:39am
|
I have several if you need more. ------------- http://lonsallischalmers.com |
Posted By: Steve in NJ
Date Posted: 08 Feb 2024 at 7:37am
|
The model B's had a bracket like that under the drain cock dead center of the engine to hold the harness. Probably the same bracket used on all the models somewhere on board the Tractor... Steve@B&B ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: Tim NH
Date Posted: 08 Feb 2024 at 8:46am
|
I have a few more pieces I'm not sure where they go. The tractor at one point had a corn picker on it. Part #1 does not fit on engine drain cock. Part #1 is really the last part I feel, going back on. Tim  ------------- 1950 WD 1959 D14 1955 WD45 1976 7000 B 207 |
Posted By: Steve in NJ
Date Posted: 08 Feb 2024 at 7:02pm
|
Tim, Part #1 looks like a bracket that would support linkage or a rod or somethin'. Can't help ya on the other two. Sorry. Steve@B&B ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: Lon(MN)
Date Posted: 09 Feb 2024 at 6:41am
|
Number one looks like the wiring harness clamp with part of the clamp missing. I have found number two on the inside of the frame rail to hold a loader bolt. Three looks like the carb linkage that has been bent. Four looks like a cozy cab bracket. ------------- http://lonsallischalmers.com |
Posted By: Mikez
Date Posted: 09 Feb 2024 at 12:57pm
Would these be number one |
Posted By: Tim NH
Date Posted: 09 Feb 2024 at 6:30pm
|
I'm not sure if that's it Mike, but it looks like it. I was informed by a PM, its for a the steel hydraulic line going to the back. I'll try my piece tomorrow. Lonn that bent rod must be tempered. I can't even think of straightening it. And each end is a different size. Tim ------------- 1950 WD 1959 D14 1955 WD45 1976 7000 B 207 |
Posted By: Mikez
Date Posted: 09 Feb 2024 at 7:24pm
|
Ok. That part number in the wd45 book say’s wiring harness ( for battery box)
|
Posted By: Nathan (SD)
Date Posted: 09 Feb 2024 at 10:07pm
| Number 2 comes with the mounted cultivator. Maybe other attachments also. |
Posted By: Tim NH
Date Posted: 10 Feb 2024 at 6:56pm
|
Thank you Nathan for that info. Mike I'll be getting in touch with you. Tim ------------- 1950 WD 1959 D14 1955 WD45 1976 7000 B 207 |