Farm Equipment - 190 XT gear reduction starter

Print Page | Close Window

190 XT gear reduction starter

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=199545
Printed Date: 24 Sep 2024 at 3:26am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190 XT gear reduction starter

Posted By: CW2 Ryno
Subject: 190 XT gear reduction starter
Date Posted: 29 Jan 2024 at 11:12am

This Probably been posted many times but as I read through the posts. I had questions. Is there a gear reduction starter from another series that will fit a 190XT series 3 ? Just curious what others have found or used. And if any modifications were required.
Thanks,
Dale

Replies:

Posted By: Hurst
Date Posted: 29 Jan 2024 at 12:02pm

I believe it was the 6080's Denso starter that was the original factory application.

Hurst

-------------
1979 Allis Chalmers 7000
5800 Hours

Posted By: CW2 Ryno
Date Posted: 29 Jan 2024 at 8:06pm

Thank you!

Posted By: KJCHRIS
Date Posted: 29 Jan 2024 at 11:08pm

I've used a Nippon Denso #028000-6780 on AC180 & 200.

Replaces Delco 1113657 and Allis 70242143 and 79004832 starters.

parts store catalog says it fits most; 180, 185, 190, 190XT, 200, 7000, 7010, 7020, 8010 using AC 301 CID engines.

There's also 1 that replaces these engines using the LUCAS starters, but I can't find its part number.

-------------
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,