Print Page | Close Window

# 392 plow bottoms

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=199491
Printed Date: 25 Nov 2024 at 1:14pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: # 392 plow bottoms
Posted By: Lalovilla
Subject: # 392 plow bottoms
Date Posted: 26 Jan 2024 at 10:50am
Hello all, I’m new on here and looking for the plough gurus! I have a Willrich 15 bottom plough that I’m wanting to rebuild.
It has the AC #392 bottoms on it and I can’t seem to source parts anywhere for it. I’m looking for shares ,shins Land sides, etc.
Curious if there’s anybody that is familiar with these , or if I could buy a 387 mould board that would fit on to this plough because there is parts readily available for the 387 bottoms.


Thanks.



Replies:
Posted By: ValleyFarm
Date Posted: 26 Jan 2024 at 11:34am
Welcome to the forum! Try googling Dave the Plow Man. He may have what you need.


Posted By: Lalovilla
Date Posted: 26 Jan 2024 at 12:15pm
Thanks I’ll do that


Posted By: PaulB
Date Posted: 26 Jan 2024 at 7:28pm
All Allis Chalmers bottoms/Frog assemblies have the same bolt pattern at the frame attachment, so yes, you cane easily put 387 bottoms in place of the 392 ones, As long as you get complete assemblies.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY


Posted By: Lars(wi)
Date Posted: 26 Jan 2024 at 7:47pm
A 15 bottom plow?

-------------
I tried to follow the science, but it was not there. I then followed the money, and that’s where I found the science.


Posted By: Lalovilla
Date Posted: 26 Jan 2024 at 9:54pm
yes it is . Would have posted a picture bill t it sure how on here?


Posted By: Mikez
Date Posted: 26 Jan 2024 at 10:16pm
Wow 15 bottom. What do you pull it with


Posted By: Lalovilla
Date Posted: 27 Jan 2024 at 1:59pm
9180 case ih 400 HP. 



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net